202 Stainless Steel Sheet/Plate

1. Thickness:0.1mm - 80mm
Width:800mm - 2,000mm
Length:300mm - 12,000mm

2. Surface:2B/HL/NO.4/8K
perforated,colored,checkered

3. Grades: Type 202 Stainless Steel

4. PVC film: Novacel(laser cutting)
Nitto(deep drawing)

5.Standards: ASTM A240 202

  • 200 Series stainless steel is a kind of austenitic stainless steel. Mn and N are added to replace some part of Ni, but they still contain some proportion of Ni, Normally it contains 4% to 6% percent. Mn is used to stable austenitic stainless steel; N is used to increase the hardness. Therefore, 200 series stainless steel is widely used in the equipment or parts that need undertake high pressure and do not have a very requirement for corrosion resistance.

    STANDARD CHEMICAL COMPOSITION

    Grade C(%) Mn(%) P(%) S(%) Si(%) Cr(%) Ni(%) N(%)
    202
    (UNS20200)
    0.15 7.5-1.0 0.060 0.030 1.0 17.0-19.0 4.0-6.0 0.25


    NOMINAL MECHANICAL PROPERTIES

    Grade Yield Tensile Strength Elongation Hardness Brinell
    202
    (UNS20200)
    260 Min Mpa 620 Mpa 40% min 241

     

    NOMINAL PHYSICAL PROPERTIES

    Density Thermal Expansion Modulus of Elasticity Thermal Conductivity
    7.8 g/cm3 17 x 10^-6/K 200 GPa 15 W/m.K

    APPLICATION OF 202 STAINLESS STEEL SHEET/PLATE

    • Furniture
    • Bins
    • Cookware & Serving Bowls
    • Window Channel Spacers
    • Safety Shoes (mid-sole protector)
    • Deep Drawn Kitchen Equipment
    • Hose Clamp
    • Trailer Frames
    • Industrial Strapping
    • Railway Rolling Stock
  • ADDITIONAL PROPERTIES OF 202 STAINLESS STEEL SHEET/PLATE

    • Mechanical Properties
      In general, the 200 series are somewhat higher in strength than the 300 series. In some applications this is beneficial, allowing reduced section thickness and weight saving in applications such as freight containers, freight truck frames and lighting columns.
    • Weldability
      The 200 series are generally weldable by the same processes as the 300 series. Although matching consumables are available, they are often welded using the same filler metals as 300 series such as type 308. Low carbon grades such as 201L have been developed for welding thick section plate.
    • Corrosion Resistance
      A clear distinction must be made between the established 200 series (with nickel at 4-5%) and the "new" ultra-low nickel grades with respect to corrosion resistance.
  • SURFACE FINISH OF 202 STAINLESS STEEL SHEET/PLATE :

    *Not all finishes are available in all alloys - (contact Yieh United Sales for more information)

    #1 Finish Hot rolled, annealed and pickled.
    #2D Finish A uniform, dull silver gray mill finish that is applied to thinner stainless steel coils,the thickness of which has been reduced by cold rolling.
    #2B Finish A semi polished surface achieved by finishing with the equivalent of a 80 to 120 grit abrasive. This finish has a pronounced grit line.
    #3 Finish A semi polished surface achieved by finishing with the equivalent of a 80 to 120 grit abrasive. This finish has a pronounced grit line.
    #4 Finish Also called brushed, directional or satin finish. A is characterized by fine polishing grit lines that are uniform and directional in appearance. The final abrasive used in the process is 150 to 220 grit.
    #4 Satin Brush Finish 150 to 180 grit finish A fine directional polish, typically used in the washroom accessories industry. Most 3.5″ floppy diskette cover plates have this finish.
    #6 Finish Polished finish achieved with the equivalent of a 240 grit abrasive. Finer grit lines and higher reflectivity than a No. 4 finish.
    #7 Finish Highly reflective surface obtained with the equivalent of a 320 grit abrasive. Minimal grit lines.
    No. 8 or True #8 mirror This is the most reflective mirror finish on the market. All of the polishing, or “grit,” lines from the preliminary polishing operations are removed. The look is that of a glass mirror. Sometimes referred to as a non directional mirror finish, Super 8, No. 9, Perfect No. 10, and even No. 12 mirror.
    CMP Super #8 mirror Chemical Mechanical Polished Super #8 mirror finished sheets are guaranteed to be free from any manufacturing defects. This product represents the ultimate in mirror polished stainless steel. It is available as a single-sided or double-sided mirror polished sheet.
    Hairline finish 80 – 140 grit finish A well defined directional polish. Starting base substrate is a No. 4 finish sheet; these sheets are polished to provide a “continuous long grain” hairline look. A finish which is popular with architects for its aesthetic, it is equally popular with fabricators due to it’s ease of fabrication and finish matching properties after welding operations.
  • INNOVATIVE TECHNOLOGY of 202 STAINLESS STEEL SHEET/PLATE

    At Yieh United Corporation, we never stop improving and developing our technologies to go beyond our customer’s expectations. We strive towards these goals to produce reliable products and ensure they can be fully utilized throughout their lifetime.

    stainless-steel-innovative-technology

  • PACKING FOR 202 STAINLESS STEEL SHEET/PLATE

    Our 202 stainless steel products are packed and labeled according to the regulations and customers’ requests.

    stainless-steel-sheet-standardpackageNote: This is Yieh United Corporation’s standard seaworthy packing for 202 stainless steel sheet sheet/plate.

    stainless-steel-sheet-special-packageNote: This is Yieh United Corporation’s special packing for 202 stainless steel sheet/plate (Extra fee is needed).

  • FAQ

    1. What is the minimum order quantity (MOQ)?
    - Normally, the MOQ for our stainless steel sheet is 200 Kg. If we have any excess inventory of stainless steel sheet, there’s no MOQ requirement. You can ask us to check when you are interested in purchasing them.

    2.What is the payment method?
    
- For new customers: 30%T/T deposit 70%T/T Before shipment.
– For partners and distributors, 30%T/T deposit 70% T/T Against B/L Copy.

    3.What is the acceptable currency?
    - We accept USD, EUR and RMB.

    4.What is the delivery time?
    
- 5 days in advance.

    5.Where is the loading port?
    - Normally, our loading ports are Shanghai, Tianjin, and Shenzhen. You can choose anyone of them, or you can select the other ports.

    6.What is the delivery term?
    - FOB, CIF, CFR, EXW

    7.Do you offer free samples?
    
- Yes, based on our stock status, we will send our customer free samples. The express fee is to be paid by our customers.

Inquiry Box


 

 

Search

Available Services

Services