316/L Stainless Steel Sheet/Plate

1. Thickness:0.1mm - 80mm
Width:800mm - 2,000mm
Length:300mm - 12,000mm

2. Surface:2B/HL/NO.4/8K
perforated,colored,checkered

3. Grades: Type 316L Stainless Steel

4. PVC film: Novacel(laser cutting)
Nitto(deep drawing)

5.Standard: ASTM/ASME UNS S31600/S31603

  • 316L stainless steel is Mo-contained material, the overall mechanical performance is better than 301 and 304. In the high temperature environment with sulfuric acid(C%<15% or C%>85%), 316L stainless steel sheet has a good performance. Meanwhile, 316L stainless steel also has good resistance to chloride corrosion performance, it is usually used in the marine environment.

    The low carbon version of 316 and is immune from sensitization (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). There is commonly no appreciable price difference between 316 and 316L stainless steel.

     

    STANDARD CHEMICAL COMPOSITION

    C Mn Si P S Cr Mo Ni N
    316
    (S31600)
    0.08 max 2.0 max 0.75 max 0.045
    max
    0.03
    max
    min:16.0
    max:18.0
    min:2.0
    max:3.0
    min:10.0
    max:14.0
    0.10 max
    316L
    (S31603)
    0.03 max 2.0 max 0.75 max 0.045 max 0.03 max min:16.0
    max:18.0
    min:2.0
    max:3.0
    min:10.0
    max:14.0
    min:2.0
    max:3.0


    NOMINAL MECHANICAL PROPERTIES

    Grade Tensile Strength ksi(min.) Yield Strength 0.2% ksi (min.) Elongation % Hardness (Brinell) MAX Hardness (Rockwell B) MAX
    316 (S31600) 75 30 40 217 95
    316L (S31603) 70 25 40 217 95


    NOMINAL PHYSICAL PROPERTIES

    Density lb m/in3 Thermal Conductivity (BTU/h ft. ºF) Electrical Resistivity (in x 10-6) Modulus of Elasticity (psi x 106) Coefficient of Thermal Expansion (in/in)/ºF x 10 -6 Specific Heat (BTU/lb/ºF) Melting Range (ºF)
    0.29 at 68ºF 100.8 at 68 -212ºF 29.1 at 68ºF 29 8.9 at 32-212ºF 0.108 at 68ºF 2500 to 2550
    9.7 at 32 - 1000ºF 0.116 at 200ºF
    11.1 at 32 - 1500ºF


    APPLICATIONS OF 316/L STAINLESS STEEL SHEET/PLATE

    • Food preparation equipment, especially in chloride environments
    • Chemical processing, equipment
    • Laboratory benches and equipment
    • Rubber, plastics, pulp & paper machinery
    • Pollution control equipment
    • Boat fittings, value and pump trim
    • Heat exchangers
    • Pharmaceutical and textile industries
    • Condensers, evaporators and tanks

     

  • ADDITIONAL PROPERTIES OF 316/L STAINLESS STEEL SHEET/PLATE

    • Corrosion Resistance
      Type 316 and 316L stainless steels exhibit better corrosion resistance than Type 304. They provide excellent pitting resistance and good resistance to most chemical involved in the paper, textile and photographic industries.
    • Heat Treatments
      Types 316 and 316L are non-hardenable by heat treatment.
      Annealing: Heat to 1900 - 2100ºF (1038 -1149 ºC), then rapidly quench.
    • Formability
      Types 316 and 316L can be readily formed and drawn.
    • Weldability
      The austenitic class of stainless steels is generally considered to be weldable by the common fusion and resistance techniques. Special consideration is required to avoid weld "hot cracking" by assuring formation of ferrite in the weld deposit. These particular alloys are generally considered to have poorer weldability than Types 304 and 304L. A major difference is the higher nickel content for these alloys which requires slower arc welding speed and more care to avoid hot cracking. When a weld filler is needed, AWS/E/ER 316L and 16-8-2 are most often specified.
  • SURFACE FINISH OF 316/L STAINLESS STEEL SHEET/PLATE :

    *Not all finishes are available in all alloys - (contact Yieh United Sales for more information)

    #1 Finish Hot rolled, annealed and pickled.
    #2D Finish A uniform, dull silver gray mill finish that is applied to thinner stainless steel coils,the thickness of which has been reduced by cold rolling.
    #2B Finish A semi polished surface achieved by finishing with the equivalent of a 80 to 120 grit abrasive. This finish has a pronounced grit line.
    #3 Finish A semi polished surface achieved by finishing with the equivalent of a 80 to 120 grit abrasive. This finish has a pronounced grit line.
    #4 Finish Also called brushed, directional or satin finish. A is characterized by fine polishing grit lines that are uniform and directional in appearance. The final abrasive used in the process is 150 to 220 grit.
    #4 Satin Brush Finish 150 to 180 grit finish A fine directional polish, typically used in the washroom accessories industry. Most 3.5″ floppy diskette cover plates have this finish.
    #6 Finish Polished finish achieved with the equivalent of a 240 grit abrasive. Finer grit lines and higher reflectivity than a No. 4 finish.
    #7 Finish Highly reflective surface obtained with the equivalent of a 320 grit abrasive. Minimal grit lines.
    No. 8 or True #8 mirror This is the most reflective mirror finish on the market. All of the polishing, or “grit,” lines from the preliminary polishing operations are removed. The look is that of a glass mirror. Sometimes referred to as a non directional mirror finish, Super 8, No. 9, Perfect No. 10, and even No. 12 mirror.
    CMP Super #8 mirror Chemical Mechanical Polished Super #8 mirror finished sheets are guaranteed to be free from any manufacturing defects. This product represents the ultimate in mirror polished stainless steel. It is available as a single-sided or double-sided mirror polished sheet.
    Hairline finish 80 – 140 grit finish A well defined directional polish. Starting base substrate is a No. 4 finish sheet; these sheets are polished to provide a “continuous long grain” hairline look. A finish which is popular with architects for its aesthetic, it is equally popular with fabricators due to it’s ease of fabrication and finish matching properties after welding operations.
  • INNOVATIVE TECHNOLOGY of 316/L STAINLESS STEEL SHEET/PLATE

    At Yieh United Corporation, we never stop improving and developing our technologies to go beyond our customer’s expectations. We strive towards these goals to produce reliable products and ensure they can be fully utilized throughout their lifetime.

    stainless-steel-innovative-technology

  • PACKING FOR 316/L STAINLESS STEEL SHEET/PLATE

    Our 316/L stainless steel products are packed and labeled according to the regulations and customers’ requests.

    stainless-steel-sheet-standardpackageNote: This is Yieh United Corporation’s standard seaworthy packing for 316/L stainless steel sheet sheet/plate.

    stainless-steel-sheet-special-packageNote: This is Yieh United Corporation’s special packing for 316/L stainless steel sheet/plate (Extra fee is needed).

  • FAQ

    1. What is the minimum order quantity (MOQ)?
    - Normally, the MOQ for our stainless steel sheet is 200 Kg. If we have any excess inventory of stainless steel sheet, there’s no MOQ requirement. You can ask us to check when you are interested in purchasing them.

    2.What is the payment method?
    
- For new customers: 30%T/T deposit 70%T/T Before shipment.
– For partners and distributors, 30%T/T deposit 70% T/T Against B/L Copy.

    3.What is the acceptable currency?
    - We accept USD, EUR and RMB.

    4.What is the delivery time?
    
- 5 days in advance.

    5.Where is the loading port?
    - Normally, our loading ports are Shanghai, Tianjin, and Shenzhen. You can choose anyone of them, or you can select the other ports.

    6.What is the delivery term?
    - FOB, CIF, CFR, EXW

    7.Do you offer free samples?
    
- Yes, based on our stock status, we will send our customer free samples. The express fee is to be paid by our customers.

Inquiry Box

[contact-form-7 404 "Not Found"]

 

 

Search

Available Services

Services