317LMN Stailess Steel Sheet/Plate

1. Thickness:0.1mm - 80mm
Width:800mm - 2,000mm
Length:300mm - 12,000mm

2. Surface:2B/HL/NO.4/8K
perforated,colored,checkered

3. Grades: Type 317L Stainless Steel

4. PVC film: Novacel(laser cutting)
Nitto(deep drawing)

5. Standard: ASTM/ASME UNS N08020

  • Alloy 317LMN is an austenitic, higher-molybdenum bearing stainless steel further alloyed with nitrogen that is particularly effective in enhancing resistance to pitting and crevice corrosion and also has excellent resistance to chemical attack. Its low carbon composition provides resistance to sensitization during welding and the additional nitrogen serves to increase its strength. Alloy 317LMN has the highest aqueous corrosion resistance of all standard stainless steels and also has higher creep, stress-to-rupture, and tensile strength at higher temperatures.

    STANDARD CHEMICAL COMPOSITION

    C Mn Si Cr Ni Mo P S N Fe
    317LMN 0.035max 2.00max 0.75max min:17.0
    max:20.0
    min:13.50
    max:17.50
    min:4.0
    max:5.0
    0.04max 0.03max min:0.10
    max:0.20
    balance

    NOMINAL MECHANICAL PROPERTIES

    Grade Tensile Strength ksi(MPa) min Yield Strength 0.2% offset ksi (MPa) min Elongation (% in 50mm) min Hardness (Brinell) MAX Hardness (Rockwell B) MAX
    317LMN 80 (550) 35 (240) 40 223 96


    NOMINAL PHYSICAL PROPERTIES

    Density lbm/in3 Coefficient of Thermal Expansion (min/in)-℉ Thermal Conductivity BTU/ft^2-hr-℉-in Speicific Heat BTU/lbm-℉ Modules of Elasticity (annealed)2-psi
    at 68 ℉ at 77-212℉ at 77-1832℉ 68-212℉ at 32 -212℉ in tension (E)
    0.29 9.2 10.8 100.8 0.11 28 x 106

    APPLICATIONS OF 317LMN STAINLESS STEEL SHEET/PLATE

    • Paper and pulp
    • Textile
    • Food processing
    • Process equipment

  • ADDITIONAL PROPERTIES OF 317LMN STAINLESS STEEL SHEET/PLATE

    • Corrosion Resistance
      Alloy 317LMN, along with 317L, is considered more resistant to atmospheric and other mild type of corrosion, along with solutions of sulfuric acids, than converntional chromium-nickel stainless steels.
    • Oxidation Resistance
      All chromium-nickel-molybdenum stainless steels have excellent resistance to oxidation.
  • SURFACE FINISH OF 317LMN STAINLESS STEEL SHEET/PLATE :

    *Not all finishes are available in all alloys - (contact Yieh United Sales for more information)

    #1 Finish Hot rolled, annealed and pickled.
    #2D Finish A uniform, dull silver gray mill finish that is applied to thinner stainless steel coils,the thickness of which has been reduced by cold rolling.
    #2B Finish A semi polished surface achieved by finishing with the equivalent of a 80 to 120 grit abrasive. This finish has a pronounced grit line.
    #3 Finish A semi polished surface achieved by finishing with the equivalent of a 80 to 120 grit abrasive. This finish has a pronounced grit line.
    #4 Finish Also called brushed, directional or satin finish. A is characterized by fine polishing grit lines that are uniform and directional in appearance. The final abrasive used in the process is 150 to 220 grit.
    #4 Satin Brush Finish 150 to 180 grit finish A fine directional polish, typically used in the washroom accessories industry. Most 3.5″ floppy diskette cover plates have this finish.
    #6 Finish Polished finish achieved with the equivalent of a 240 grit abrasive. Finer grit lines and higher reflectivity than a No. 4 finish.
    #7 Finish Highly reflective surface obtained with the equivalent of a 320 grit abrasive. Minimal grit lines.
    No. 8 or True #8 mirror This is the most reflective mirror finish on the market. All of the polishing, or “grit,” lines from the preliminary polishing operations are removed. The look is that of a glass mirror. Sometimes referred to as a non directional mirror finish, Super 8, No. 9, Perfect No. 10, and even No. 12 mirror.
    CMP Super #8 mirror Chemical Mechanical Polished Super #8 mirror finished sheets are guaranteed to be free from any manufacturing defects. This product represents the ultimate in mirror polished stainless steel. It is available as a single-sided or double-sided mirror polished sheet.
    Hairline finish 80 – 140 grit finish A well defined directional polish. Starting base substrate is a No. 4 finish sheet; these sheets are polished to provide a “continuous long grain” hairline look. A finish which is popular with architects for its aesthetic, it is equally popular with fabricators due to it’s ease of fabrication and finish matching properties after welding operations.
  • INNOVATIVE TECHNOLOGY of 317LMN STAINLESS STEEL SHEET/PLATE

    At Yieh United Corporation, we never stop improving and developing our technologies to go beyond our customer’s expectations. We strive towards these goals to produce reliable products and ensure they can be fully utilized throughout their lifetime.

    stainless-steel-innovative-technology

  • PACKING FOR 317LMN STAINLESS STEEL SHEET/PLATE

    Our 317LMN stainless steel products are packed and labeled according to the regulations and customers’ requests.

    stainless-steel-sheet-standardpackageNote: This is Yieh United Corporation’s standard seaworthy packing for 317LMN stainless steel sheet sheet/plate.

    stainless-steel-sheet-special-packageNote: This is Yieh United Corporation’s special packing for 317LMN stainless steel sheet/plate (Extra fee is needed).

  • FAQ

    1. What is the minimum order quantity (MOQ)?
    - Normally, the MOQ for our stainless steel sheet is 200 Kg. If we have any excess inventory of stainless steel sheet, there’s no MOQ requirement. You can ask us to check when you are interested in purchasing them.

    2.What is the payment method?
    
- For new customers: 30%T/T deposit 70%T/T Before shipment.
– For partners and distributors, 30%T/T deposit 70% T/T Against B/L Copy.

    3.What is the acceptable currency?
    - We accept USD, EUR and RMB.

    4.What is the delivery time?
    
- 5 days in advance.

    5.Where is the loading port?
    - Normally, our loading ports are Shanghai, Tianjin, and Shenzhen. You can choose anyone of them, or you can select the other ports.

    6.What is the delivery term?
    - FOB, CIF, CFR, EXW

    7.Do you offer free samples?
    
- Yes, based on our stock status, we will send our customer free samples. The express fee is to be paid by our customers.

Inquiry Box

[contact-form-7 404 "Not Found"]

 

Search

Available Services

Services