405 Stainless Steel Sheet/Plate

1. Thickness:0.1mm - 80mm
Width:800mm - 2,000mm
Length:300mm - 12,000mm

2. Surface:2B/HL/NO.4/8K
perforated,colored,checkered

3. Grades: Type 405 Stainless Steel

4. PVC film: Novacel(laser cutting)
Nitto(deep drawing)

5. Standard: ASTM/ASME UNS S40500

  • Alloy 405 Stainless Steel is a 12% chromium stainless steel designed to be used in the as-welded condition. Unlike the other grades of 12% chromium stainless, 405 is not vulnerable to extensive hardening through air cooling from high temperatures.


    STANDARD CHEMICAL COMPOSITION

    Type C Cr Fe Mn Si S P Ni Al
    405 max:0.08 min:11.50
    max:14.50
    balance max:1.00 max:1.o0 max:0.03 max:0.04 max:0.50 min:0.10
    max:0.30

     

    NOMINAL MECHANICAL PROPERTIES

    Grade Tensile Strength ksi (MPa) min Yield Strength 0.2% offset (MPa) min Elongation % in 50mm (min.) Hardness (Brinell)
    MAX
    Hardness (Rockwell B) MAX
    405 60
    (415)
    25
    (170)
    20 179 88

     

    NOMINAL PHYSICAL PROPERTIES

    Density lbm/in3 Coefficient of Thermal Expansion (min/in) - °F Thermal Conductivity BTU/hr-ft-°F Specific Heat BTU/lbm°F Modules of Elasticity (annealed)2 -psi
    at 68°F at 68-212°F at 68-1832°F at 200°F at 32-212°F in tension (E)
    0.279 9.2 20.5 416 0.11 28 x 106

     

    APPLICATIONS OF 405 STAINLESS STEEL SHEET/PLATE

    • Steam nozzles
    • Partitions
    • Annealing boxes
    • Quenching racks
    • Fabrications that cannot be annealed after welding
  • ADDITIONAL PROPERTIES OF 405 STAINLESS STEEL SHEET/PLATE

    • Corrosion Resistance
      >>Same corrosion resistance of Type 410 Steel.
      >>Used in situations where more weldability is desired than Type 410.
    • Machinability
      >>Type 405 can be easily machined due to its soft and ductile characteristics.
    • Weldability
      >>Can be welded using shielded fusion and resistance techniques.
      >>Oxyacetylene is not recommended.
      >>Post weld annealing will maximize ductility.
  • SURFACE FINISH OF 405 STAINLESS STEEL SHEET/PLATE

    *Not all finishes are available in all alloys - (contact Yieh United Sales for more information)

    #1 Finish Hot rolled, annealed and pickled.
    #2D Finish A uniform, dull silver gray mill finish that is applied to thinner stainless steel coils,the thickness of which has been reduced by cold rolling.
    #2B Finish A semi polished surface achieved by finishing with the equivalent of a 80 to 120 grit abrasive. This finish has a pronounced grit line.
    #3 Finish A semi polished surface achieved by finishing with the equivalent of a 80 to 120 grit abrasive. This finish has a pronounced grit line.
    #4 Finish Also called brushed, directional or satin finish. A is characterized by fine polishing grit lines that are uniform and directional in appearance. The final abrasive used in the process is 150 to 220 grit.
    #4 Satin Brush Finish 150 to 180 grit finish A fine directional polish, typically used in the washroom accessories industry. Most 3.5″ floppy diskette cover plates have this finish.
    #6 Finish Polished finish achieved with the equivalent of a 240 grit abrasive. Finer grit lines and higher reflectivity than a No. 4 finish.
    #7 Finish Highly reflective surface obtained with the equivalent of a 320 grit abrasive. Minimal grit lines.
    No. 8 or True #8 mirror This is the most reflective mirror finish on the market. All of the polishing, or “grit,” lines from the preliminary polishing operations are removed. The look is that of a glass mirror. Sometimes referred to as a non directional mirror finish, Super 8, No. 9, Perfect No. 10, and even No. 12 mirror.
    CMP Super #8 mirror Chemical Mechanical Polished Super #8 mirror finished sheets are guaranteed to be free from any manufacturing defects. This product represents the ultimate in mirror polished stainless steel. It is available as a single-sided or double-sided mirror polished sheet.
    Hairline finish 80 – 140 grit finish A well defined directional polish. Starting base substrate is a No. 4 finish sheet; these sheets are polished to provide a “continuous long grain” hairline look. A finish which is popular with architects for its aesthetic, it is equally popular with fabricators due to it’s ease of fabrication and finish matching properties after welding operations.
  • INNOVATIVE TECHNOLOGY of 405 STAINLESS STEEL SHEET/PLATE

    At Yieh United Corporation, we never stop improving and developing our technologies to go beyond our customer’s expectations. We strive towards these goals to produce reliable products and ensure they can be fully utilized throughout their lifetime.

    stainless-steel-innovative-technology

  • PACKING FOR 405 STAINLESS STEEL SHEET/PLATE

    Our 405 stainless steel products are packed and labeled according to the regulations and customers’ requests.

    stainless-steel-sheet-standardpackageNote: This is Yieh United Corporation’s standard seaworthy packing for 405 stainless steel sheet sheet/plate.

    stainless-steel-sheet-special-packageNote: This is Yieh United Corporation’s special packing for 405 stainless steel sheet/plate (Extra fee is needed).

  • FAQ

    1. What is the minimum order quantity (MOQ)?
    - Normally, the MOQ for our stainless steel sheet is 200 Kg. If we have any excess inventory of stainless steel sheet, there’s no MOQ requirement. You can ask us to check when you are interested in purchasing them.

    2.What is the payment method?
    
- For new customers: 30%T/T deposit 70%T/T Before shipment.
– For partners and distributors, 30%T/T deposit 70% T/T Against B/L Copy.

    3.What is the acceptable currency?
    - We accept USD, EUR and RMB.

    4.What is the delivery time?
    
- 5 days in advance.

    5.Where is the loading port?
    - Normally, our loading ports are Shanghai, Tianjin, and Shenzhen. You can choose anyone of them, or you can select the other ports.

    6.What is the delivery term?
    - FOB, CIF, CFR, EXW

    7.Do you offer free samples?
    
- Yes, based on our stock status, we will send our customer free samples. The express fee is to be paid by our customers.

Inquiry Box

[contact-form-7 404 "Not Found"]

 

 

 

Search

Available Services

Services