1. Thickness:0.1mm - 80mm
Width:800mm - 2,000mm
Length:300mm - 12,000mm
3. Grades: Alloy 200
4. PVC film: Novacel(laser cutting)
Nickel grade 200 is 99.6% pure nickel, one of the toughest metals. Nickel 200′s characteristics include excellent mechanical properties, a low gas content, low vapor- pressure, magnetic properties, high thermal and electrical conductivity. These properties and its chemical composition make Nickel 200 fabricatable and highly resistant to corrosive environment. Nickel 200 is useful in any environment below 600º F. It is highly resistant to corrosion by neutral and alkaline salt solutions. Nickel 200 also has low corrosion rates in neutral and distilled water. The metal can be hot formed to any shape and formed cold by all methods.
|Product||Condition||Ultimate Tensile Strength (ksl)||0.2% Yield Strength (ksl)||Elongation% (min)||Hardness (HRB)|
PHYSICAL PROPERTIES (condition A)
|Modulus of Elasticity
|Mean Coefficient of Thermal Expansion (in./in./℉ x 10-6)||Thermal Conductivity (BTU-in/ft2-h-℉)|
APPLICATIONS OF Alloy 200 STAINLESS STEEL SHEET/PLATE
- Food processing equipment
- Marine and offshore engineering
- Salt production
- Caustic handling equipment
- Manufacture and handling of sodium hydroxide, particularly at temperatures above 300° F
- Reactors and vessels in which fluorine is generated and reacted with hydrocarbons
ADDITIONAL PROPERTIES OF Alloy 200 STAINLESS STEEL SHEET/PLATE
- Corrosion resistance
>>excellent resistance to many corrosive media from acid to alkaline.
>>most useful under reducing conditions but, where a passive oxide is formed, it can also be used in oxidizing conditions.
>>most significant property is extremely high resistance to caustic alkalies up to and including the molten state.
>>presence of chlorates must be kept to a minimum, as they accelerate the rate of attack.
>>resistance of Alloy 200 to mineral acids varies according to temperature and concentration and whether or not the solution is aerated.
>>corrosion resistance is better in deaerated acid.
>>In acid, alkaline and neutral salt solutions, this alloy shows good resistance, but severe attack occurs in oxidizing salt solutions.
>>resistant to all dry gases at room temperature.
>>low-carbon alloy can be used in dry chlorine and hydrogen chloride at temperatures up to 550 ‹C (1020 ‹F).
- Hot Working
>>Hot working temperatures should be between 1200° F and 2250° F with heavy forming to be performed at temperatures above 1600° F.
>>Annealing should be performed at a temperature between 1300° F and 1600° F.
>>Care should be taken when choosing the anneal temperature and time at temperature for this can greatly influence the mechanical properties and structure of the material.
>>Nickel 200 can be easily welded by conventional welding, brazing, and soldering processes with the exception of the oxyacetylene process.
[/restab] [restab title="Surface Finish"]
SURFACE FINISH OF Alloy 200 STAINLESS STEEL SHEET/PLATE :
*Not all finishes are available in all alloys - (contact Yieh United Sales for more information)
|#1 Finish||Hot rolled, annealed and pickled.|
|#2D Finish||A uniform, dull silver gray mill finish that is applied to thinner stainless steel coils,the thickness of which has been reduced by cold rolling.|
|#2B Finish||A semi polished surface achieved by finishing with the equivalent of a 80 to 120 grit abrasive. This finish has a pronounced grit line.|
|#3 Finish||A semi polished surface achieved by finishing with the equivalent of a 80 to 120 grit abrasive. This finish has a pronounced grit line.|
|#4 Finish||Also called brushed, directional or satin finish. A is characterized by fine polishing grit lines that are uniform and directional in appearance. The final abrasive used in the process is 150 to 220 grit.|
|#4 Satin Brush Finish||150 to 180 grit finish A fine directional polish, typically used in the washroom accessories industry. Most 3.5″ floppy diskette cover plates have this finish.|
|#6 Finish||Polished finish achieved with the equivalent of a 240 grit abrasive. Finer grit lines and higher reflectivity than a No. 4 finish.|
|#7 Finish||Highly reflective surface obtained with the equivalent of a 320 grit abrasive. Minimal grit lines.|
|No. 8 or True #8 mirror||This is the most reflective mirror finish on the market. All of the polishing, or “grit,” lines from the preliminary polishing operations are removed. The look is that of a glass mirror. Sometimes referred to as a non directional mirror finish, Super 8, No. 9, Perfect No. 10, and even No. 12 mirror.|
|CMP Super #8 mirror||Chemical Mechanical Polished Super #8 mirror finished sheets are guaranteed to be free from any manufacturing defects. This product represents the ultimate in mirror polished stainless steel. It is available as a single-sided or double-sided mirror polished sheet.|
|Hairline finish||80 – 140 grit finish A well defined directional polish. Starting base substrate is a No. 4 finish sheet; these sheets are polished to provide a “continuous long grain” hairline look. A finish which is popular with architects for its aesthetic, it is equally popular with fabricators due to it’s ease of fabrication and finish matching properties after welding operations.|
INNOVATIVE TECHNOLOGY of Alloy 200 STAINLESS STEEL SHEET/PLATE
At Yieh United Corporation, we never stop improving and developing our technologies to go beyond our customer’s expectations. We strive towards these goals to produce reliable products and ensure they can be fully utilized throughout their lifetime.
PACKING FOR Alloy 200 STAINLESS STEEL SHEET/PLATE
Our alloy 200 stainless steel products are packed and labeled according to the regulations and customers’ requests.
1. What is the minimum order quantity (MOQ)?
- Normally, the MOQ for our stainless steel sheet is 200 Kg. If we have any excess inventory of stainless steel sheet, there’s no MOQ requirement. You can ask us to check when you are interested in purchasing them.
2.What is the payment method?
- For new customers: 30%T/T deposit 70%T/T Before shipment. – For partners and distributors, 30%T/T deposit 70% T/T Against B/L Copy.
3.What is the acceptable currency?
- We accept USD, EUR and RMB.
4.What is the delivery time?
- 5 days in advance.
5.Where is the loading port?
- Normally, our loading ports are Shanghai, Tianjin, and Shenzhen. You can choose anyone of them, or you can select the other ports.
6.What is the delivery term?
- FOB, CIF, CFR, EXW
7.Do you offer free samples?
- Yes, based on our stock status, we will send our customer free samples. The express fee is to be paid by our customers.