Stainless Steel Plate

1. Thickness:0.1mm - 80mm
Width:800mm - 2,000mm
Length:300mm - 12,000mm

2. Surface:2B/HL/NO.4/8K
perforated,colored

3. Grades:200/300/400 series
LDX2101, Duplex 2205, Duplex 2507

4. PVC film: Novacel(laser cutting)
Nitto(deep drawing)

5. MOQ: 50kg

  • With years of production experience, we can manufacture stainless steel sheet based on different requirements from our customers. Yieh United stocks over 30 grades of stainless steel plate - in 200/300/400 series stainless steel grades, high temperature stainless steel grades, precipitation hardening, duplex stainless steel grades and some nickel alloys. All stainless steel flat rolled items can be cut to size with our full range of processing services, including water jet cutting or laser cutting capabilities.


    The Advantages of Yieh United Stainless Steel Plate

    Standards EN/DIN, ASTM/ASTM, SUS, UNS, JIS, etc
    200 Series Stainless Steel Grades 201/201L, 202, 204Cu
    300 Series Stainless Steel Grades 301, 302, 303, 304/304L, 304L Polished, 304DDQ, 304EDD, 304H, 305, 309/309S/309H, 310/310S/310H, 316/316L/316L Polished/316Ti, 317L/317LMN, 321/321H, 330, 347/347H, 375
    400 Series Stainless Steel Grades 403, 404GP, 405, 409/409L, 410/410S/410HT, 416/416HT, 420, 422, 430, 431, 439, 440C
    Duplex Stainless Steel Grades LDX2101, Duplex 2205, Duplex 2304, Duplex 2507
    Precipitation Hardening Grades 17-4PH, 17-4PH 900, 17-4PH 1025, 17-4 H1150 (per customer request), 17-7, 17-7PH 630, 15-5PH
    Nickel Alloy Grades Alloy 20, Alloy 200, Alloy 400, Alloyd254, Alloy 600, Alloy 800/800HT, Alloy C-276 (nickel grades may require more lead time)
    Technical COLD ROLLED STAINLESS STEEL PLATE HOT ROLLED STAINLESS STEEL PLATE
    Thickness 0.10mm-6.00mm 3.00mm-80.0mm
    Width 800mm-1540mm 800mm-2,000mm
    Length 300mm-12,000mm 300mm-12,000mm


    The Specification of Yieh United
    Stainless Steel Plate

    1. Raw Material: 100% recyclable. Originated from Taiwan, Krupp, Columnbia, Baosteel, TISCO
    2. Standard Sizes: 4ft x 8ft, 4ft x 10ft, 5ft x 5ft, etc
    3.Cut-to-Size Service:
    -The available cold rolled sizes are as follows, for width: 1,000mm slitting edge/(1,010-1,020mm) mill edge, 1,219mm slitting edge/(1,235-1,250mm)mill edge. The max length is 6,000mm.
    -The available hot rolled sizes are as follows. for width: 1,500mm, slitting edge/mill edge, 2,000mm sliting edge. maximum length 6,000mm.
    -For predesigned structure cutting: water jet cutting, laser cutting services are available.
    4.Types of Finishes:
    -mill finishes:
    1D/1E – hot rolled plate, 2D (annealed and pickled finish), 2B (skin passed finish), BA or 2BA (bright annealed)
    -mechanically polished finishes:
    ground – 1G hot rolled / 2G cold rolled, dull buffed – EN NO.2J for cold rolled, 1J for hot rolled / 2J for cold rolled, bright polished, mirror polished, No.4/No.6(HL)/No.7/No.8 (8K) finishes
    -special finishes:
    electroplating or electrodepositing, textured, patterned,colouring, metal spraying, paint/enamel, electro polishing
    5.PVC Films: laser film, black and white film, transparent blue film
    6.Plywood pallets and boxes are available based on requirement from customers. Reinforced bondage guarantee the pallets from being crashed.
    7.Packing: Plywood pallets and boxes are available based on requirement from customers. Reinforced bondage guarantee the pallets from being crashed.
    8.Logistics: Shanghai Yieh United Corporation has signed a long term cooperation with the world third largest forwarder, CMA, which will gurantee the effiency of logistics arrangement.
    9.Special Requests:customized logo, shipping mark, package type, and other processing service are flexibly available.

    No.8 8k mirror finished stainless steel surface2 No.6 surface finish No.4 stainless steel sheet surface finishEtched surface Perforated stainless steel processing Embossed stainless steel surface

  • Value-added Service of Yieh United Stainless Steel Plate

    Every industry has its unique set of stainless steel plate specifications and needs. We offer many Value Added Services to meet your needs from cut-to-length to hard-to-find materials and special requirements. With over 13 years in the business, our team is professional at finding out solutions to fit your needs.

    Let Yieh United Corporation Be Your Partner!

    Stainless Steel Plate Beveling We can cut and bevel the edges of stainless steel plate to prepare for welding or other processing.
    Stainless Steel Plate Grinding We can provide grinding service of stainless steel plate in order to satisfy customers’ flatness requests.
    Stainless Steel Plate Polishing Our stainless steel plate can be polished to a #4 polish, #6 polish,#7polish, or a #8 mirror finish. It can also be polished on one side or two sides.
    Stainless Steel Plate Perforating Our perforated stainless steel palte comes in a selection of hole shapes, pattern sizes, gauges and grades. It has endless applications such as enclosures,partitions, sign panels, guards, screens, and more.
    Stainless Steel Plate Laser Cutting Our technologically advanced laser machines provide us with an efficient, high speed and cost effective form of profiling plate metal which ensures a superior clean cut and oxide free finish.
    Stainless Steel Plate Water Jet Cutting We offer stainless steel plate dynamic water jet cutting in order to process complex part geometry.
    Stainless Steel Plate Embossing Our stainless steel embossed patterns including basket embossed pattern,diamond pattern or square pattern.
    Stainless Steel Plate Decorating We offer various decorative stainless steel plate, such as stainless steel mirror plate, stainless steel hairline plate,color coated stainless plate, etched stainless steel plate, vibration finish stainless steel plate, bead blast finish stainless steel plate, stain brush finish stainless steel plate, and more.
    Stainless Steel Plate Heatreating & Annealing We can heatreat 410 and 17-4PH stainless steel plate to change mechanical properties. In some cases, secondary annealing 300 series might be required depending on the application.

    1. Customized Cutting Machine.

    plate-cutting-machine1

    2. Cutting and Leveling Machine for cold rolled coils.

    for-normal-coils for-thicker-coils

    3. Noval Cutting and Leveling Machine for Hot Rolled coils.

    SONY DSC

  • Polished Surface of Stainless Steel Plate

    1. Stainless Steel Plate Polishing
    Plate polishing is one of the most widely used polishing method, which is more flexible than coil polishing. Width ranges from 500mm to 1,520mm. No MOQ is required for sheet polishing.

    sheet polishing Sheet polishing sheet polishing

    2. Coil Polishing
    Coil polishing machine can make more stable surface. The belt can be used for longer time. the surface is more stable than sheet polishing process; therefore, if customers order more than 10 tons of same width sheet or coil, coil polishing machine is better than sheet polishing.

    coil polishing stainless steel polished coil coil polishing

    3. Hot Rolled Polishing Stainless Steel Plate

    For hot rolled stainless steel plate polishing, Shanghai Yieh United Corporation combined manual polishing with machinery polishing.
    Due to hot rolled stainless steel plate is thicker and the surface is based on No.1. Its surface may not be as even as 2B effect; therefore, fully automatic polishing may not reach a ideal No.4 or No.6 effect.

    hot rolled polishing3

    After machinery polishing, hot rolled stainless steel plate will be processed with manual polishing, which can make the uneven part polished; therefore, manual polishing is an unnecessary part for hot rolled stainless steel sheet polishing.

    Hot rolled polishing

    Reasons to Choose Yieh United Polished Stainless Steel Plate:
    You might wonder why you choose Yieh United No.4 stainless steel sheet instead of others. The answer is simple. It’s because our Polished Stainless Steel Sheet is simply the best of the best.

    Here are some reasons:
    1. Raw Material
    Our coil is originated from Taiwan, Krupp, Columnbia, Baosteel, TISCO, and other major steel production of high quality stainless steel. If coil is not from a good standard factory, the coils surface may have some problems, especially for the edge. They are not easily leveled and processed, after processing, there will be some vertical strips which make the surface not expected. Here is an example to show the bad finished surface is due to the material origin.laser-film for no4 stainless steel sheetNote: these white strips cannot be removed by polishing.

    2.Sandbelt
    In the processing, sandbelt working time is a key factor for controlling the surface quality. If the sandbelt is new, the polished lines will be very rough and thick, and have less reflective effect.After the sandbelt has been used for a long time depending on the quality of the sandbelt,the polished strips maybe too shallow,which cannot reach the expected effect.Mirror-finished stainless steel sheet 3.Film
    After the surface processing, choosing the PVC film will have much influence on afterwards application. We have several kinds of film to be choosen, and they are suitable for different application. The film not only serves as a protection but also affect the afterwards processing.

    >>Laser film: laser film is considered to be one of the best film. The thickness is at least 10c. Laser film normally has higher melting degree than other film, which will not be melted and sticked on the surface after heat treatment. Here is an example of normal film after heat treatment.(Please confirm the downstream processing, and then decide which film is to be applied.)laser-film for no.4 stainless steel sheet

    >>Black and white film imported from other countries except China.This kind of film cannot undertake high temperature treatment, but it is relatively thicker and more sticky than Chinese Origin film. It can be used in most mechanical process and have a good performance.
    black and white film for no4 stainless steel sheet

    >>Transparent blue film and Chinese black and white film: these two kinds of film are relatively not considered to be good qualified, which means they are not very sticky, and not thick enough. The thickness ranges from 2c to 10c. Most customers apply these film in many ordinary processing. When the downstream need bending, or deep drawing, the film may suffer from cracking.

    blue-film for no4 stainless steel sheet

  • Mechanical Finishes of Yieh United Stainless Steel Plate

    Our stainless steel plate can also be ordered to different finishes. A description of the standard finishes available on sheet follows. Shanghai Yieh United stainless steel products does not only have the capability to polish stainless steel products but also can provide customized-manufactured services when required by the customer.

    Please feel free to contact us if you need a special request or have a technical question.

    #1 Finish Hot rolled, annealed and pickled.
    #2D Finish A uniform, dull silver gray mill finish that is applied to thinner stainless steel coils,the thickness of which has been reduced by cold rolling.
    #2B Finish A semi polished surface achieved by finishing with the equivalent of a 80 to 120 grit abrasive. This finish has a pronounced grit line.
    #3 Finish A semi polished surface achieved by finishing with the equivalent of a 80 to 120 gritabrasive. This finish has a pronounced grit line.
    #4 Finish Also called brushed, directional or satin finish. A number 4 finish is characterized by fine polishing grit lines that are uniform and directional in appearance. The final abrasiveused in the process is 150 to 220 grit.
    #4 Satin Brush Finish 150 to 180 grit finish A fine directional polish, typically used in the washroom accessories industry. Most 3.5″ floppy diskette cover plates have this finish.
    #6 Finish Polished finish achieved with the equivalent of a 240grit abrasive. Finer grit lines and higher reflectivity than a No. 4 finish.
    #7 Finish Highly reflective surface obtained with the equivalent of a 320grit abrasive. Minimal grit lines.
    No. 8 or True #8 mirror This is the most reflective mirror finish on the market. All of the polishing, or “grit,” lines from the preliminary polishing operations are removed. The look is that of a glass mirror. Sometimesreferred to as a nondirectional mirror finish, Super 8, No. 9, Perfect No. 10, and even No. 12 mirror.
    CMP Super #8 mirror Chemical Mechanical Polished Super #8 mirror finished sheets are guaranteed to be free from any manufacturing defects. This product represents the ultimate in mirror polished stainless steel. It is available as a single-sided or double-sided mirror polished sheet.
    Hairline finish 80 – 140 grit finish A well defined directional polish. Starting base substrate is a No. 4 finish sheet; these sheets are polished to provide a “continuous long grain” hairline look. A finish which is popular with architects for its aesthetic, it is equally popular with fabricators due to it’s ease of fabrication and finish matching properties after welding operations.
  • Innovative Technology of Yieh United Stainless Steel Plate

    At Yieh United Corporation, we never stop improving and developing our technologies to go beyond our customer’s
    expectations.
    We strive towards these goals to produce reliable products and ensure they can be fully utilized throughout their lifetime.

    stainless-steel-innovative-technology

  • Packing for Yieh United Stainless Steel Plate

    Our stainless steel products are packed and labeled according to the regulations and customers’ requests.

    stainless-steel-sheet-standardpackageNote: This is Yieh United Corporation’s standard seaworthy packing for stainless steel plate.

    stainless-steel-sheet-special-packageNote: This is Yieh United Corporation’s special packing for stainless steel plate (Extra fee is needed).

  • FAQ

    1. What is the minimum order quantity (MOQ)?
    - Normally, the MOQ for our stainless steel plate is 200 Kg. If we have any excess inventory of stainless steel sheet, there’s no MOQ requirement. You can ask us to check when you are interested in purchasing them.

    2.What is the payment method?
    
- For new customers: 30%T/T deposit 70%T/T Before shipment.
– For partners and distributors, 30%T/T deposit 70% T/T Against B/L Copy.

    3.What is the acceptable currency?
    - We accept USD, EUR and RMB.

    4.What is the delivery time?
    
- 5 days in advance.

    5.Where is the loading port?
    - Normally, our loading ports are Shanghai, Tianjin, and Shenzhen. You can choose anyone of them, or you can select the other ports.

    6.What is the delivery term?
    - FOB, CIF, CFR, EXW

    7.Do you offer free samples?
    
- Yes, based on our stock status, we will send our customer free samples. The express fee is to be paid by our customers.

Search

Available Services

Services