Stainless Steel Precision Strip

1. Thickness:0.01-1mm
Width:3-650mm

2. Surface:BA,2B/HL/NO.4/8K

3. Grades:200/300/400 series
LDX2101, Duplex 2205, Duplex 2507

4. PVC film: Novacel(laser cutting)
Nitto(deep drawing)

5. Hardness:FH H 3/4H 1/2H 1/4H

  • The Yieh United Stainless Steel Precision Strip/Tape Advantages

    • Features: flexibility in mill choices. we apply different mills based on the tolerance requirement from the customer. If the tolerance is less than +/-0.01mm, we will apply Sendimier 20 rolled mill. If the tolerance is above +/-0.01mm, we will apply normal mill. In this way, we not only guarantee the quality but also reduce the cost to lowest for the customers.
    • Raw Material: the supply of raw materials is a key issue for the Yieh United steel industry, and our stainless steel is 100 percent recyclable, and originated from Taiwan, Krupp, Columbia, Baosteel, TISCO.
    • Dimension: Our thickness range for precision strips is from 0.05 mm to 1.0 mm. Our minimum width is 3 mm. The maximal width of precision strips is normally about 650 mm. We can also supply coils of precision stainless steel strip only 0.05 mm thick with a width up to 1250 mm.
    • Inner Diameters of Coils:Typical inner diameters are 300 mm, 400 mm, 508 mm. Upon request, we can offer coils with inner diameters of 200 mm, 250 mm or even non-standard customized inner diameters.
    • Value added Service: Nomal slit edge, Very low burr(<5% of the thickness), Deburring, Round edge based on the customers’ requirement, V-shape profiled processing, Custom edge.
    • Straightness is 3IU
    • Bur Level is Less Than 6%
    • Coil Finishing: Bright Annealed, Dull-Bright, Special Textures & Coatings
    • Hardness:1/8H, 1/4H, 1/2H, 3/4H, H,EH,FH
    • Packaging: allowing our stainless steel sheet to be used in rigorous environments. Plywood pallets and boxes are available based on requirement from customers. Reinforced bondage guarantee the pallets from being crashed.
    • Record Tracking System: with Yieh United Record Tracking System, every detail concerns with Payment Info, Production Arrangement, Quality Control Test, Package Confirmation, MTC, Loading Arrangement will be sent to you automatically.
    • Logistics: Shanghai Yieh United Corporation has signed a long term cooperation with the world third largest forwarder, CMA, which will gurantee the effiency of logistics arrangement.
    • Special requests are accepted:customized logo, shipping mark, package type, and other processing service are flexibly
    Standard ASTM/ASME 240/480, JIS 4305, DIN EN10088-2
    200 Series Stainless Steel Grades 201, 202, 253M
    300 Series Stainless Steel Grades 302, 303, 304/304L, 304H, 309/309S/309H, 310/310S/310H,
    316L/316L Polished,
    317L/ 317LMN, 321/321H, 330, 347/347H
    400 Series Stainless Steel Grades 409L, 410/410S, 416, 420, 430, 440C
    Duplex Stainless Steel Grades Duplex 2304, 2205, 2507
    Precipitation Hardening Grades 17-4PH, 17-7PH H1150 (per customer request), 15-5PH
    Nickel Alloy Grades Alloy600, Alloy 800/800HT, Alloy C-276 (nickel grades may require more lead time)
    Thickness 0.05mm - 1.00mm (20-High Cold Rolling Mill)
    Width 3mm -650mm
    Length As customers’ requests
    Hardness 1/8H, 1/4H, 1/2H, 3/4H, H,EH,FH

    stainless steel precison strip288217

  • Application of Yieh United Stainless Steel Precision Strip/Tape

    • For Deep Drawing Applications: High-nickel alloys in our 300 series of austenitic stainless steel strips/tapes and some 400 series of martensitic stainless steel strips/tapes can be used very well in this application. They can be stretch or formed easily into a deep drawn part, such as a kitchen sink. The most frequently used alloys supplied by Yieh United Corporation for deep drawing applications are 304 DDQ (deep drawing quality) and 304 EDD (extra deep drawing quality).
    • For Stamping Applications: Our stainless steel strip/tape can be used in various press-forming operations in coining, embossing, blanking and pressing metal parts. The manufactured stainless steel parts range from household goods to automobile parts.
    • For Roll Forming Applications: Our stainless steel strip/tape is an ideal for producing parts with long lengths and in large quantities, such as fuel lines or other tubing products. It also can be produced as door hardware and heavy-truck applications by the roll forming process.
    • For Fourslide Applications: Our stainless steel strip/tape can be used for progressive or transfer-stamping operations with fourslide metal stamping machine, and can be shaped into predetermined parts such as clips, wireforms and hardware parts.

    Specification of Detailed Applications

    Stainless Steel Precision Strip For Chemical Filter

    Standards: ASTM/ASME 240/480, JIS 4305, DIN EN10088-2

    Grades: 301, 304/304L, 316L, 317L, 321
    Thickness: 0.07mm-2.0mm
    Width: 8mm-700mm
    Length: as customers’ request
    Surface finish:

    As the leading manufacturer and supplier of stainless steel strip, We are taking advantage of producing stainless steel strip for chemical filter from 0.09mm to 0.3mm thickness and 600mm to 700mm width.


    Stainless Steel Precision Strip for Corrugated Pipe (Stainless steel corrugated pipe compensator)
    Main grades: 201(J4), 202, 304, 304L, 316L
    size:0.15–1.0*20-700mm*C
    Tolerance : thickness +/-0.01mm, width +/-0.02mm.
    hardness:160-190HV
    Our advantage :Precise slitting based on Sendzimir mill)
    mill which guarantee the Weldability, and elongation rate can ensure the stamping performance and hydraulic shock.

    Stainless Steel Precision Strip for Flexible Duct
    Main grade: 201(J4), 202, 304, 304L, 316L
    Size: 0.15–1.0*7-700mm*C
    Tolerance: thickness +/-0.01mm, width +/-0.02mm
    hardness : 160-190HV
    Our advantage : precise slitting which guarantee the weldability and surface brightness

    Stainless Steel Precision Strip for Textile Healds:
    Main grades: 202, 301, 304, 304L, 316L, 317L
    Size: 0.3-0.6*3/4/5.5/6.5/8mm*C
    Tolerance: thickness +/-0.01mm, width +/-0.02mm;
    Main advantage: precise slitting , and deburring is available

    Stainless Steel Precision Strip for Hose Clamp:
    Main grades: 202, 304, 304L, 316L, 301, 321, 430
    Size: 0.2-1.5*5/7/8/12.7/14.2/19/22-700mm*C
    Thickness: 0.5mm/0.6mm/0.7mm/0.8mm
    Hardness: 170-190HV
    Main advantage: annealing to increase the brightness and precise slitting

    Stainless Steel Precision Strip for Stamping:
    Main grades: 201(J4), 304, 304L, 316L, 301,430
    Size: 0.4-2.0*8-700mm*C
    Most of our products can be used for stamping (Material Test Report and sample are available)

  • Value-added Service of Yieh United Stainless Steel Precision Strip/Tape

    Every industry has its unique set of stainless steel strip/tape specifications and needs. We offer many Value Added Services to meet your needs from cut-to-length to hard-to-find materials and special requirements. With years experience in the business, our team is professional at finding out solutions to fit your needs.

    Let Yieh United Corporation Be Your Partner!

    • Polishing: Bright Annealed, Dull Bright
    • Filming: Laser film(Nitto, Novacel ), 10c PVC film
    • Deburring: Reduce the bur level based on customers’ requirement
    • Chamfering: Machining the angle edge based on customers’ requirement
  • Packing for Yieh United Stainless Steel Precision Strip/Tape

    Our stainless steel precision strip/tape products are packed and labeled according to the regulations and customers' requests.

    packing for yieh united stainless steel strip/tape

  • Innovative Technology of Yieh United Stainless Steel Precision Strip/Tape

    Since 2001, we have excelled in developing the manufacturing expertise to produce exceptionally thin stainless steel strip. We combine proficiency with an unwavering commitment to research and innovative, which established us as one of the China’s leading manufacturer in the production of customized thin gauge. Our 20-High Cold Rolling Mill can always meet your high quality demands while giving you enormous flexibility. The output thickness can be rolled as thin as 0.03mm for stainless steel strip, and the mill speeds of up to 500 meters per minute. The 20-High Cold Rolling Mill has a small gauge tolerance due to its small but faster floating work rolls.
    We strive towards these goals to produce reliable products and ensure they can be fully utilized throughout their lifetime.

    facility for yieh united stainless steel strip/tape

  • 1. What is the minimum order quantity MOQ?
    -Normally, the MOQ for our stainless steel precision strip/tape is 200 Kg. If we have any excess inventory of stainless steel strip/tape,there’s
    no MOQ requirement.You can ask us to check when you are interested in purchasing them.

    2. What is the payment method?
    - For new customers: 30%T/T deposit 70%T/T Before shipment.
    - For partners and distributors, 30%T/T deposit 70% T/T Against B/L Copy.

    3.What is the acceptable currency?
    - We accept USD, EUR and RMB.

    4. What is the delivery time?
    - 5 days in advance.

    5. Where is the loading port?
    - Normally, our loading ports are Shanghai, Tianjin, and Shenzhen. You can choose anyone of them, or you can
    select the other ports.

    6. What is the delivery term?
    - FOB, CIF, CFR, EXW

    7. Do you offer free samples?
    - Yes, based on our stock status, we will send our customer free samples. The express fee is to be paid by our customers.

Inquiry Box

[contact-form-7 404 "Not Found"]

Search

Available Services

Services